Showing 13–24 of 120 results

• 

  Read more

  Hot Bend Fitting

  Hot Bends are pipe fittings produced by heating and bending the pipe to achieve a specific radius and change the direction of flow, often used for large diameter pipes or when specific bend radii are required, typically in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure
• 

  Read more

  Equal Cross Tee Fitting

  Equal Cross Tees are pipe fittings with one inlet and three outlets of the same diameter, used to create two branch connections at 90-degree angles in a piping system, typically in lower pressure applications.

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  U Bends Fitting

  U Bends are pipe fittings with a U-shape used to change the direction of flow by 180 degrees with a specific center-to-center distance between the legs, typically in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  Oval Caps Fitting

  Oval Caps are pipe fittings used to close the end of an oval-shaped pipe or fitting, typically in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  Straight Tee Fitting

  Straight Tees are pipe fittings with one inlet and two outlets of the same diameter, used to create a branch connection at a 90-degree angle in a piping system, typically in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  Reducing Tee Fitting

  Reducing Tees are pipe fittings with one inlet and two outlets, where one of the outlets has a smaller diameter than the main run of the tee, used to reduce the pipe size in a branch connection, typically in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure
• 

  Read more

  Custom Radius Bend Pipe Fitting

  Custom Radius Bend Pipes are pipe fittings manufactured with a specific bending radius to change the direction of flow, tailored to unique piping layouts and typically used in lower pressure applications

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure
• 

  Read more

  Ball Caps Fitting

  Ball Caps are pipe fittings used to close the end of a pipe or fitting, typically in lower pressure applications.

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  Eccentric Reducer Fitting

  Eccentric Reducers are pipe fittings designed to join two pipes of different diameters with their bottom or top edges aligned, preventing fluid trapping and air accumulation in horizontal pipelines.

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

  Read more Low Pressure
• 

  Read more

  Concentric Reducer Fitting

  Concentric Reducers are pipe fittings designed to join two pipes of different diameters along the same central axis, ensuring a smooth, inline reduction in flow

  Range:
  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:
  SS/C.S-FORGED/REINFORCED.
  SS/C.S-WROUGHT.
  SS-WROUGHT.
  C.S.
  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.
  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.
  ASTM A403 GR-304/304L,321/H,904/L&316/316L.
  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.
  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure
• 

  Read more

  45° Elbow fitting

  45° Elbow fittings are used to change the direction of flow by 45 degrees in a piping system, typically in lower pressure applications

  Range:

  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:

  SS/C.S-FORGED/REINFORCED.

  SS/C.S-WROUGHT.

  SS-WROUGHT.

  C.S.

  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:

  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.

  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.

  ASTM A403 GR-304/304L,321/H,904/L&316/316L.

  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.

  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure
• 

  Read more

  90° Elbow fitting

  90° Elbow fittings are used to change the direction of flow by 90 degrees in a piping system, typically in lower pressure applications. 

  Range:

  ¼’-24 (SMLS).
  26’ – 48’ WELDED.

  Material:

  SS/C.S-FORGED/REINFORCED.

  SS/C.S-WROUGHT.

  SS-WROUGHT.

  C.S.

  ALLYOYS/C.S/SS/DSS/SDSS-HIGH TEMP/ LOW TEMP ALLOYS.

  Standards:

  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65 F9,F11,F22,F52.

  ASTM A234WPB,A420 WPL6 A860-GR WPHY 42,52,60,65.

  ASTM A403 GR-304/304L,321/H,904/L&316/316L.

  ASTM A234 WP1,WP5,WP9,WP11,WP22,WP91.

  ASTM A815 UNS 31803, UNS 32750/32760.

   

  Read more Low Pressure