Products
Showing 97–108 of 120 results
-
ASME Slip on Flange
Read more FlangesASME Slip on Flanges are designed for easy installation, as pipes simply slip into the flange before welding.
- Standard Size: 1/2” To: 24”
- Class: 150 To: 2500
- Face: RF – RTJ – FF
- Material: ASTM A105 – ASTM A350 – ASTM A694 – ASTM 266 – ASTM A182 F316 – ASTMA 182 F304.
-
ASME Weld neck flange
Read more FlangesWeld Neck Flanges are manufactured and stocked according to international standards, offering superior strength and load-bearing capacity for high-pressure applications.
Designed for seamless welding to pipes, these flanges ensure optimal performance and durability in demanding environments.
Standard Size: ½” to 24”
Face: RF, RTJ, FF
Class: 150 to 2500
Schedule: 5s to XXS
Material: ASTM A105, ASTM A350, ASTM A694, ASTM A266, ASTM A182 F316, ASTM A182 F304. -
ASME Long Weld Neck Flange
Read more FlangesLong Weld Neck Flanges are manufactured and stocked in accordance with international standards, offering superior strength and reliability for various industrial applications.
Available in a wide range of sizes and pressure ratings, these flanges provide a secure and durable solution for critical piping system connections.
- Standard Size: 1/2” To: 24”
- Class: 150 To: 2500
- Face: RF – RTJ – FF
- Material: ASTM A105 – ASTM A350 – ASTM A694 – ASTM 266 – ASTM A182 F316 – ASTMA 182 F304.
-
Ball VALVE
Read more Valves ManufacturingBall Valves are quarter-turn valves designed for reliable shut-off and smooth flow control in industrial piping systems.
- Standard Size: 1” to 12”
- Class: 150# – 600#
- Connection Type: Flanged
- Floating /Trunnion: Floating & Trunnion
- Body Material: ASTM A105
- Trim Material: A182 F316
- Seal Material: PTFE, RPTFE, Devlon & Nylon
- Forming Type: Forged / Casted
- STD: API 6D
-
Flat Gasket
Read more GasketsFlat gaskets are universal sealing elements with a large range of application in all branches of industry. They can be used within a temperature range of – 200 °C up to a maximum of + 550 °C. A suitable material should be selected depending on the medium, medium concentration, temperature and type of flange being used.
-
Threaded (High Pressure Fittings)
Read more FittingsWe provide High-Pressure fittings that are applied in the Oil & Gas, Energy, Chemical, and Petrochemical Sectors.
Whether Seamless or Welded, all fittings are supplied as per international standards, in different sizes and materials.
-
Buttwelded Fittings
Read more Fittingsbuttweld elbows are manufactured in a wide range of dimensions (combinations of outside diameter and wall thickness) to fit ASME B36.10 and ASME B36.19 carbon, alloy and stainless steel pipes of any size between 2 and 48 inches (and above).
Buttweld elbows below 24 inches in diameter are produced by cutting, heating and bending seamless steel pipes; pipe elbows of larger sizes are manufactured, instead, from welded pipes or steel plates.
The three most common types of elbows in piping are the 45, 90, and 180 degrees (or return elbow)
-
Insulation Kits Gasket
Read more GasketsThe purpose of flange isolation kits is to prevent the (electrolytic) corrosion of flanges and flanged joints that static currents present on a piping system may induce.
The gasket isolation kit consists of a special gasket, isolation sleeves for all the stud bolts and nuts, and special washers. These components are manufactured in special materials with proper chemical stability, low water absorption, and dielectric properties.
Even if flange isolation kits are inexpensive accessories, they may extend the service life of pipes and flanged joints. Insulation kits are available up to 24 inches, generally, but higher nominal sizes can be manufactured if needed.
Dielectric flange isolation kits are available for ASME B16.5, B.1647, API flanges of all sizes and classes, from 1/2 up to 80 inches.
-
Ring-Joint Type (RX) Gasket
Read more MetallicRing-Type Joints (RTJ) are high-integrity metallic seals designed for high-pressure and high-temperature applications in flanged connections, providing a reliable and robust sealing solution.
- Range: RX-20 To: RX-215
- Material: Carbon Steel, SS304/316, Inconel, Monel
- Standards: API 6A, ASME B16.20
-
Needle Valve
Read more Valves SupplyNeedle Valves are precision valves designed for accurate flow regulation in high-pressure applications.
- Standard Size: ½” to 2”
- Material Grade: ASTM A182, F310
- Class: Up to 6000 PSI
- Connection Type: F/M NPT
-
Butterfly Valve
Read more Valves SupplyButterfly Valves are compact quarter-turn valves designed for efficient flow control and space-saving installation.
- Standard Size: 2” To 12”
- Material Grade: WCB
- Class: Up to 2500#
- Connection Type: Flanged
- Forming Type: Casted
-
Gate Valve
Read more Valves SupplyGate Valves are isolation valves designed to allow full flow or complete shut-off in piping systems.
- Standard Size: 2” to 24”
- Material Grade: WCB
- Class: Up to 2500#
- Connection Type: Flanged
- Forming Type: Casted
