Products
Showing 25–36 of 117 results
-
Y-Way Fitting
Read more High PressureY-Way fittings are pipe fittings designed to combine or divide fluid flow at an angle, typically offering a smoother flow path compared to a standard tee, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Elbow 45° Fitting
Read more High PressureElbows 45° are pipe fittings designed to change the direction of flow by 45 degrees within a piping system, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4’ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Cross fitting
Read more High PressureCross fittings are pipe fittings with four branches, designed to connect four pipes at a single point, allowing for complex flow distribution within a piping system, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
M/F Elbows Fitting
Read more High Pressure(M/F) Elbows are pipe fittings designed to change the direction of flow, typically by 90 degrees, and feature a male thread on one end and a female thread on the other for connection, particularly in high-pressure systems.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Red Tee Fitting
Read more High PressureRed Tees are pipe fittings with three branches where one of the branch sizes is smaller than the other two, designed to change the flow direction and reduce the pipe size within a piping system, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Tee Fitting
Read more High PressureTees are pipe fittings with three branches, designed to either combine or divide the flow of fluids within a piping system, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Elbow 90° Fitting
Read more High Pressure90° Elbows are pipe fittings designed to change the direction of flow by 90 degrees within a piping system, particularly in high-pressure applications.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Hex Head Cap Fitting
Read more High PressureHex Head Caps are fittings with a hexagonal head, designed to close or seal the ends of pipes or fittings in pressure-containing systems, particularly in high-pressure applications, allowing for wrench tightening.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Full Coupling Fitting
Read more High PressureFull Couplings (Socket Weld) are pipe fittings designed to join two pipes of the same diameter together in a straight line using a socket welding method, particularly in high-pressure systems, providing a strong and leak-tight connection.
Material:
SS/C.S-FORGED/REINFORCED,
SS/C.S-WROUGHT,
SS-FORGED
Range:
Up To – 4″ (Forged)
Grade:
ASTM A 105/A182 F9,F11,F22,F52.
ASTM A182 F304/304L F316/316L.
-
Ball Valve
Read more Valves SupplyBall Valves are quarter-turn isolation valves designed for reliable shut-off and flow control.
- Standard Size: ½” to 24″
- Material grade:A105, WCB, SS316
- Class: 150 – 2500#
- Connection Type: Flanged
- Forming Type: Forged/Casted
-
PTFE Gaskets
Read more Non-MetallicPTFE (Polytetrafluoroethylene) Gaskets, also known as Teflon gaskets, are chemically inert seals offering excellent resistance to a wide range of corrosive fluids and high temperatures.
- Range: ¼” to 48”
- Material: PTFE (Teflon)
- Class: Up to 1500 PSI
- Standards: FDA, DIN
-
Inside Bolt Circle (IBC) Gasket
Read more Non-MetallicInside Bolt Circle (IBC) gaskets are sealing components designed to fit within the bolt circle of a flanged connection, providing a reliable seal for various pressure applications.
- Range:½” to 60”
- Material: Rubber (EPDM, NBR), PTFE, Compressed Fiber (Aramid, Cellulose), Graphite
- Class: 150–900 PSI
- Standards: ASME B16.21
